Tüm ürünler
-
Ultrasonik Hata Dedektörü
-
Ultrasonik Kalınlık Ölçer
-
Kaplama Kalınlığı Ölçer
-
Portatif Sertlik Ölçme Cihazı
-
X-ışını hatası dedektörü
-
X-ışını boru hattı tarayıcıları
-
Tatil Detektörü
-
Manyetik parçacık testi
-
Girdap Akımı Test Cihazları
-
Penetrant testi
-
Kıyı Durometresi
-
Brinell Sertlik Denetleyicisi
-
rockwell sertlik test cihazı
-
Mikro Vickers Sertlik Ölçme Cihazı
-
Malzeme Sertliği Denetleyici
-
titreşim ölçer
-
yüzey pürüzlülük test cihazı
-
Profil Projektörü
-
Parlaklık ölçer
-
Beton Deneme Çekici
-
Lazer Kızılötesi Termometre
-
BobAstm E114-15 İnç Tip 1018 Kalibrasyon Test Bloğu Karbon Çelik Mini Iiw 2 -
WilliamAstm E114-15 İnç Tip 1018 Kalibrasyon Test Bloğu Karbon Çelik Mini Iiw 2
-
tomAstm E114-15 İnç Tip 1018 Kalibrasyon Test Bloğu Karbon Çelik Mini Iiw 2
-
AslanAstm E114-15 İnç Tip 1018 Kalibrasyon Test Bloğu Karbon Çelik Mini Iiw 2
GOST Floor Gloss Meter Iso2813 Astm-D2457 Din67530 Hgm-B20
Ücretsiz numuneler ve kuponlar için bana ulaşın.
Naber:0086 18588475571
WeChat: 0086 18588475571
Skype: sales10@aixton.com
Eğer herhangi bir endişeniz varsa, 24 saat online yardım sağlıyoruz.
xÜrün ayrıntıları
| Ölçüm aralığı | 0,0－300,0Gu | Okuma Hatası | <1.2Gu |
|---|---|---|---|
| istikrar | 0,4 Gs/30 dakika | Pencere Boyutunun Ölçülmesi | 14mm (Kısa Aks) ×15mm (Uzun Aks) |
| Boyut | 114×35×65 mm | Çalışma voltajı | Şarj edilebilir pil |
| Vurgulamak | astm-d2457 floor gloss meter,rechargeable battery floor gloss meter,din67530 gloss meter for floor finish |
||
Ürün Açıklaması
ISO2813 ASTM-D2457 DIN67530 Gloss Meter HGM-B20 Floor Gloss Meter
Detailed Product Description
Standard
International standards: ISO2813, ASTM-D2457, DIN67530 and China standard GB9754, GB9966, GB8807, JJG696-2002.
Application
1. Measurement of Paint and Dope surface gloss on Car, Electronic appliance and Musical instrument industry.
2. Measurement of floor board, marble, granite and ceramic tile gloss on architecture, decoration industry.
3. Measurement of printing ink and paper on Printing and Casing industry.
4. Measurement of the others need to be measured.
5. Hard drawn aluminum alloys
Features
1. Small and light, real easy to be carried and used.
2. One 1.5 mignon alkaline Battery can be used for almost 60 hours and 10000 reading.
3. High stability
4. Long-term stable light source needs no replacing forever.
5. Quartz crystal standard board, no excursion.
6. Zero self-adjustment.
Specifications
| The technical parameters up to JJG 696 (First-level standards). |
| 1,test range:0.0-300.0(Ｇs) |
| 2,test accuracy:＜1.2(Ｇs) |
| 3,stability:0.4Gs/30min |
| 4,test caliber:14×15(mm) |
| 5,size:114×35×65 (mm) |
| 6,power:AA battery 1.5V 1pc |
Instructions
1. Switching meter to open, press the need to test the key point.
2. Operation: Open standards board boxes, and glass will be standard for on-board flat on the table, will center positioning meter, "inverted triangle" signs at the edge groove center, adjust adjustment knobs, meter readings should be the same to the standard black glass plate nominal value (see box corresponding standard plate angle data).
3. Calibration: measuring equipment calibration good white ceramic plate (to be positioning equipment centers "inverted triangle" signs at the edge groove Centre) the corresponding numerical point of the show should not be larger than the standard white ceramic plate nominal value ± 1.2 gloss units, or black and white standards board should check the cleanliness of the surface, or equipment failure. If meter is working well, do not need to make calibration as often.
4. Measurement: Use the good calibration meter to measure the tested samples.
Standard Delivery
| Gloss meter | 1pc |
| Instrument case | 1pc |
| Standard board |
2pc A black board is used for the highlight calibration A white board is used for the low light calibration |
| Battery charger | 1pc |
| English instruction manual | 1pc |
| Calibration certificate | 1pc |
HUATEC Gloss meter Reference angle for different application
| angle | Point of reference for (foreign) (China) |
Application
|
|
20° |
DIN-67530 ISO-2813 GB9754 ASTM-D523 ASTM-D2457 GB8807 |
high gloss paint, ink, plastic. |
|
20° |
ASTM-D1834 TAPPI-T653 GB8941.1 |
high gloss stencil, cast coated paper. |
|
45° |
ISO-2767 GB8941-2 | surface of aluminum and aluminum oxide. |
| 45° |
ASTM-C346 GB/T3295 ASTM-D2457 GB8807 |
pottery, ceramic, plastic, plastic film, Stone |
| 45° | JIS-E8741 | pottery, ceramic, plastic, plastic film, Stone |
|
60° |
ISO-2813 GB9754 ASTM-C584 GB9966 ASTM-D523 DIN-67530 ASTM-D2457 GB8807 |
Mid-gloss paint, ink, plastics, ceramics, stone.
|
|
75° |
ISO-8254 TAPPI-T480 GB8941.3 |
copperplate paper |
Önerilen Ürünler
-
VIDEO
