HUATEC GROUP CORPORATION export@huatecgroup.com 86-10-82921131

HUATEC GROUP CORPORATION Şirket Profili
Ürünler
Evde > Ürünler > titreşim ölçer > HG5003 Vibration Calibrator Vibration Meter Measuring Instruments

HG5003 Vibration Calibrator Vibration Meter Measuring Instruments

Ürün Ayrıntıları

Menşe yeri: Pekin

Marka adı: HUATEC

Sertifika: ISO, CE, GOST

Model numarası: HG5003

Ödeme ve Nakliye Şartları

Min sipariş miktarı: 1 adet

Ambalaj bilgileri: Standart İhracat Paketi

Teslim süresi: 1-4 gün

Ödeme koşulları: T/T, PayPal, Western Union

Yetenek temini: ayda 500 adet

En İyi Fiyatı Alın
Ürün Ayrıntıları
Vurgulamak:

portable vibration meter

,

digital vibration meter

Doğruluk:
%5
İvme Genliği (RMS):
9,81 m/s2(1 g)±%3
Çıkış dalga formu:
Sinüs dalga formu
Dalga Biçimi Bozulması:
%5
Maksimum yük:
120 gram
Çalışma sıcaklığı:
0-55 oC
Doğruluk:
%5
İvme Genliği (RMS):
9,81 m/s2(1 g)±%3
Çıkış dalga formu:
Sinüs dalga formu
Dalga Biçimi Bozulması:
%5
Maksimum yük:
120 gram
Çalışma sıcaklığı:
0-55 oC
Ürün Tanımı

 

HG5003 Vibration Calibratorcan be used to calibrate small vibration transducers and also vibration measuring instruments

 

 

HG5003 Vibration Calibrator

HG5003 Vibration Calibrator Vibration Meter Measuring Instruments 0

General Description

HG5003 Vibration Calibrator can be used to calibrate small vibration transducers and also vibration measuring instruments and vibration monitoring systems quickly. Standard sine signals with fixed frequency 159.2Hz and fixed amplitude is generated from the calibrator.

HG5003 Vibration Calibrator combines sine signal generator, power amplifier, standard transducer and shaker in one and features a smaller volume, high accuracy and easy operation. It can be used either in laboratory or on site.

Specifications

  • Accuracy: 5%
  • Acceleration Amplitude(RMS):9.81m/s2(1g)±3%
  • Velocity Amplitude (RMS):9.81mm/s±3%
  • Displacement Amplitude (RMS):9.81µm±3%
  • Vibration Frequency:159.2Hz±0.5%
  • Output waveform: Sine waveform
  • Waveform distortion:£5%
  • Maximum Load: 120Gram
  • Battery: 9V rechargeable, Need 15 hours for fully charge
  • Can make the device work for 1.5 hours
  • Automatic power off time: 50seconds.
  • Working temperature: 0-55 oC
  • Size:Φ52×160mm
  • Weight: 600 gram (with batteries)
  • Tapped hole for sensor installation: M5 x 30mm

Operation

 


1

Fix M5 screw, accelerometer on the shaker table of the calibrator

 

2

Press the only switch at the calibrator to start the vibration.

 

3

Compare the reading of your vibration meter before the shaker power off after 50sec.

 

4

The LED will turn from GREEN to ORANGE when battery low. It means you need to recharge the battery for 15 hours.