İyi bir fiyat.  çevrimiçi

Ürün ayrıntıları

Evde > Ürünler >
titreşim ölçer
>
Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v

Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v

Marka Adı: HUATEC
Model Numarası: HG-808A
Adedi: 1 adet
Paketleme Detayları: Standart İhracat Paketi
Ödeme Koşulları: T/T, Paypal, Western Union
Detay Bilgisi
Menşe yeri:
Pekin
Sertifika:
ISO, CE, GOST
Enine hassasiyet:
<% 5
Ölçüm parametresi:
Hız veya ivme, sanal değer veya ivme tepe değeri
Titreşimli değer voltaj çıkışı:
0-5V
Alarm seviyesi:
2
Alarm çıkışı:
Her katta röle dokunmatik noktası (normalde açık veya kapalı isteğe bağlı)
Dereceyi koruyun:
IP65
Yetenek temini:
Ayda 500 pc
Vurgulamak:

portable vibration meter

,

digital vibration meter

Ürün Tanımı

 

Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v

 

Overview

 

    Integrated vibration switch, it is design to integrated by acceleration sensor, integrator,transduce and relay. Output 0-5V vibratory acceleration peak value or effective speed, and corresponding to the two touch spots of II level alarm.

    Integrated vibration switch is easy to install,it is use together with panel meter, DCS, PLC etc. monitoring system of spot.

                                                                                                                  

Technique specification                                                               

1. Transverse sensitivity: <5%

2. Shell electrical isolation

3. Measure parameter: velocity or acceleration, virtual value or acceleration peak value

4. Measure range optional: Max 180 ms-2 Or200mm/s

5. Vibrating value voltage outpute: 0-5V

6. Frequency Response:

          10-1000Hz(velocity,5% accuracy)

          1-1000 Hz(acceleration,5% accuracy)

7. Working tempreture (℃): -20~70;

8. Power supply: 24Vdc;

9. Alarm level: 2

10. Alarm output: relay touch spot on each level(normally open or close optional)

11. alarm value adjustable

12. Cable socket Model:(SY)X12KX3P

13. Case material: aluminum, sealed

14. Extraction: sideway

15. Protect grade: IP65

16. Sensor install: M8 x 1

17. size:Ф40 x 80 mm

18. weight: 250g

 

Connection method

 

Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v 0

 

Attention

  1. Sensor and the object that under test should be closely connected. surface should be smooth, Sensor is installed by washer
  2. For prevent loose and water vapor entrance, after the cable socket and sensor socket tighten could smear silicon rubber
  3. For avoid the interference from earth wire, terminals of the transducer and the case is isolated. Please notice don’t shot out

 

Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v 1

Puanlar ve İncelemeler

Genel derecelendirme

5.0
Bu tedarikçi için 50 incelemeye göre

Sıralama Fotoğrafı

Aşağıdaki, tüm derecelendirmelerin dağılımıdır.
5 Yıldız
100%
4 Yıldız
0%
3 Yıldız
0%
2 Yıldız
0%
1 Yıldız
0%

Tüm İncelemeler

1
12
Brazil Oct 29.2025
123